shanghai seasfurniture co.,ltd

Finger joint worktop quality as follows: MC in 8%-10%.
finger jointed allowed in length,lamellas length 200mm and longer random but end of lamellas allows shorter than 200mm, lamellas width 40mm+/-2mm and one edge of stave allows less 40mm. A face, allows pin knots up to 5mm in diameter ,No sapwood . no defect allowed,don't allow have off color,no rotten ,no insect attack ,no black string,no mildew,no crack and crush or any other defects
B face, allows sound knots up to 25mm in diameter, some sapwood but evenly distributed ,no other defect allowed. other is same to A face
Both face sanding 180grit.
2,EG's quality as follows: MC in 8%-10%.the length is not allowed finger joint,bar width 45/48MM,Request the same board face the same of bar width, but allow one side below 45 MM .
A face, allows pin knots up to 5mm in diameter ,no other defects allowed. No sapwood . no defect allowed,don't allow have off color,no rotten ,no insect attack ,no black string,no mildew,no crack and crush or any other defects
B face, allows sound knots up to 25mm in diameter, some sapwood but evenly distributed ,no other defect allowed. other is same to A face
Both face sanding 180grit